Bestselling device in already its third generation
The Vario series, which has already proved successful for a number of years, has been revised both technically and visually and Vario III combines all the functions of a solid and extremely reliable label printer with excellent ease of use. Like its precursors, the new device also has all the well-known options such as the cutter unit, dispenser unit, external rewinder, RFID and scanner. A WLAN interface for radio data transfer can be installed as a new option.
The large, optional 7" touchscreen display is easy and convenient to operate. The use of a cursor, mouse or similar is superfluous because thanks to state-of-the-art technology, the touchscreen display can be operated with your fingertips in the same way as current smartphones or tablet PCs. The Vario III is made from recyclable components and materials. The series range also uses very little energy.
This way you will always reach your desired result!
With the Vario III we wanted to give you flexibility on the job site, so it is equipped with its own keyboard and can be operated without a PC. The Vario III stores every label you create and keeps it ready for you in the memory.
The Vario III even controls the printing processes on its own.
Printing speed up to 200 mm/second
Large graphic display (ideal for displaying international signs and special symbols) with 132 x 64 pixels and white backlight.
Standard integrated LAN, USB as well as serial and parallel interface.
Option WLAN 802.11 b/g interface
Print resolution 200 dpi, 300 dpi and 600 dpi
2 x USB host for connection of USB keyboard / USB stick
Label photocell transmission + reflexion from above
Label detection with transmission and reflexion from above (for black mark on the label).
Label photocell transmission + reflexion from below
Label detection with transmission and reflexion from below (for black mark on the label).
Label photocell transmission 26 mm extended
Label detection with transmission scan point: 26 mm
Label photocell transmission 34 mm extended
Label detection with transmission scan point: 34 mm
Dispenser inputs/outputs
With a maximum of 16 control inputs and outputs, different functions of the printer can be released and operating conditions be shown.
Dispenser long with photocell with locking device
The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.
The dispenser unit with extended dispenser edge is locked at the outside.
Dispenser with photocell
The photocell recognizes the label in the dispensing position and interrupts the print order. After removing the label by hand the next label is printed immediately.
Dispensing device with light barrier with locking from the outside
The light barrier detects the label in the dispensing position and interrupts the print job. After removing the label by hand, the next one is printed immediately.
Dispenser without photocell
The dispenser unit is controlled by a manual switch, foot switch or an external control signal.
Dispenser without photocell with locking device
The dispenser unit is controlled by a manual switch, foot switch or an external control signal. The dispenser unit is locked on the outside.
Guillotine cutter unit
The guillotine cutter permits cutting of labels up to 240 g/m². Single cut, interval cut and final cut can be selected.
Tear-off plate
After terminating the print order the labels can be separated by hand.
Label tightener
Necessary for material tension. Especially in backfeed mode to improve positioning with high print speed.
Leporello guiding
For the use of folded (zigzag) label material.
External unwinding device PA 50A
Label rol Max. outside diameter 300 mm Max. label width 176 mm Core diameter 40 mm (optional 75 mm)
Dimensions Height x Width x Depth 334 x 240 x 250 mm Core diameter 40 mm Kit for additional core 75 mm Connecting set (option)
External rewinder PR45 II
Label rol Max.outside diameter: 270 mm Max. label width: 150 mm label winding: outside / inside
rotation direction switchable
Core diameter 40 mm (optional 75 mm)
Dimensions Width x Height x Depth: 305 x 220 x 250 mm
Power supply values Nominal voltage: 24 VDC
Operating conditions Operating temperature: 5–45 °C RH: max. 85 %
further options Core diameter: 40 mm Kit for additional core: 75 mm
Subject to change without notice
Connection set for winding and unwinding devices
The connection set is used for the exact alignment of the PR 12, PR 17, PR 45 and PA 50A external rewinding devices to the Vita II, Compa II, Spectra and Vario II printers.
Compact Flash Card (2 GB)
Compact Flash Cards for storing labels and data for stand-alone operation in the printer.